HP 4370 Scan negatives, Note, Note, Picture, Scan Film, Scan Film, Show Preview, 6.Select Scan negatives using the Transparent Materials Adapter (TMA)

Chapter 1

The scan is sent to the destination selected in the HP Scanning dialog box.

10.When finished, remove the slides. Place the negative strip holder back into the scanner lid for convenient storage.

Scan negatives

To scan 35 mm negatives, use the negative strip holder. The negative strip holder is stored within the slide holder that is part of the built-in transparent materials adapter (TMA).

Note You must use the negative strip holder to scan 35 mm negatives. Always return the negative strip holder to its storage place inside the slide holder in the scanner lid when done.

1.Open the scanner lid and remove the negative strip holder from the slide holder.

2.Slide a negative strip into the negative strip holder so that the shiny side of the negative faces you.

Note Negatives are easily damaged. Touch them only on their edges.

Use the blanks to fill in any unused spaces in the holder.

3.Insert the negative strip holder back into the slide holder, and then close the scanner lid.

4.Press the Scan Film button () on the scanner, or click Scan Film in the HP Solution Center.

5.Select Picture.

6.Select Scan negatives using the Transparent Materials Adapter (TMA).

If you want to preview the scanned image, select the Show Preview check box on the screen, or begin the scan from the HP Solution Center.

8 HP Scanjet 4370