Removal and replacement procedures

c.Remove the display panel from the display enclosure.

d.Remove the six Phillips PM2.0×3.0 screws 1 that secure the display hinges to the display panel.

e.Remove the display hinges 2 from the display panel. The display hinges are available using spare part number 535871-001.

5.If it is necessary to replace the webcam module cable, release the webcam module cable 1 from the clips and routing channels 2 built into the display enclosure, and then remove the cable 3. The webcam module cable is included in the Display Cable Kit, spare part number 536430-001.

Reverse this procedure to reassemble and install the display assembly.

4–40

Maintenance and Service Guide