Computer Setup
Diagnostics menu
Select | To do this |
|
|
Memory Check | Run a comprehensive test on system memory. |
|
|
System Configuration menu
✎Some of the menu items listed in this section may not be supported by your computer.
Select | To do this |
|
|
Language (or press f2) | Change the Computer Setup language. |
|
|
Boot Options | ■ Set an f9, f10, and f12 delay when starting up. |
| ■ Enable/disable |
| ■ Enable/disable floppy boot. |
| ■ Enable/disable internal network adapter boot and set the |
| boot mode (PXE). |
| ■ Enable/disable MultiBoot, which sets a boot order that can |
| include most boot devices in the system. |
| ■ Set the Express Boot Popup delay, in seconds. |
| ■ Set the boot order. |
|
|
Device Configurations | ■ Swap the functions of the fn key and left ctrl key. |
| ■ Enable/disable USB legacy support. When enabled, |
| USB legacy support allows the following: |
| ❐ Use of a USB keyboard in Computer Setup, even when |
| a Windows operating system is not running |
| ❐ Startup from bootable USB devices, including a |
| hard drive, diskette drive, or optical drive connected by |
| a USB port to the computer |
|
|
■ Enable/disable embedded WLAN Device Radio. | |
| ■ Enable/disable Network Interface Controller (LAN). |
| ■ Enable/disable LAN/WAN switching. |
| ■ Enable/disable Wake on LAN. |
| ■ Enable/disable the optical disc drive. |
|
|
Port Options | ■ Enable/disable the USB port. |
| ■ Enable/disable the ExpressCard slot. |
|
|
Maintenance and Service Guide |