HP Thin Client 4410t Mobile Solving travel connection problems

The Phone and Modem Options window is displayed.

9.Do one of the following:

●To set your new location setting as the current location, click OK.

●To select another location setting as the current location setting, select your preference from the settings in the Location list, and then click OK.

NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “HP Write Filters,” for additional information.

NOTE: You can use the preceding procedure to add location settings for places within your own country or region as well as in other countries or regions. For example, you could add a setting named “Work” that includes dialing rules for accessing an outside line.

Solving travel connection problems

If you experience modem connection problems when using the computer outside of the country or region in which you purchased it, try the following suggestions.

●Check the telephone line type.

The modem requires an analog, not a digital, telephone line. A line described as a PBX line is usually a digital line. A telephone line described as a data line, fax machine line, modem line, or standard telephone line is usually an analog line.

●Check for pulse or tone dialing.

An analog telephone line supports one of 2 dialing modes: pulse dialing or tone dialing. These dialing mode options are selected in the Phone and Modem Options settings. The dialing mode option selected must match the dialing mode supported by the telephone line in your location.

To determine the dialing mode supported by a telephone line, dial a few digits on the telephone, and then listen for clicks (pulses) or tones. Clicks indicate that the telephone line supports pulse dialing. Tones indicate that the telephone line supports tone dialing.

To change the dialing mode in your current modem location setting, follow these steps:

1.Select Start > Control Panel > Printers and Other Hardware > Phone and Modem Options.

2.Then click the Dialing Rules tab.

3.Select your modem location setting.

4.Click Edit.

5.Click either Tone or Pulse.

6.Click OK twice.

NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “HP Write Filters,” for additional information.

●Check the telephone number you are dialing and the response of the remote modem.

54 Chapter 9 Modem and LAN