●WLAN module see (WLAN module on page 43).
●Hard drive (see Hard drive on page 37).
●USB/Audio (see USB/Audio)
●Display panel cable (see Display panel on page 31). Remove the system board:
1.Remove the following cables:
●Power connector cable (1)
●Speaker cable (2)
●Subwoofer cable (3)
●USB/Audio board cable (4)
●Keyboard cable (5)
●Keyboard light cable (6)
●TouchPad board cable (7)
●Wireless cable (8)
●Display panel cable (9)
●Power button board cable (10)
2.Remove the 4 Phillips PM 2.5x3 screws (1) until the system board rests at an angle.
Component replacement procedures 49
