4.Remove the display panel (see Display panel on page 31).
5.Remove the base enclosure (see Base enclosure on page 33).
6.Disconnect the battery cable (see Battery on page 35). Remove the speakers:
1.Turn the computer, with the front edge toward you.
2.Release the 2 Phillips PM 2.0×3.0 screws securing each speaker. (1)
3.Remove the speakers and cables (2).
Reverse this procedure to install the speakers.
Power button board
Description | Spare part number |
|
|
Power button board |
|
|
|
Before removing the Power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the display panel (see Display panel on page 31).
Component replacement procedures 59
