Dell C5220 Front Panel User Interface

13

Front Panel User Interface

The BMC provides control panel interface functionality including indicators

(fault, status, and ID LEDs) and buttons (power/ID).

Power Button

The power button turns the device on and off.

The power button has a deferred mechanism. When the DC is off the power button

ignores one (1) second or less activation to protect against accidental DC power on.

LEDs

BMC Heartbeat LED

The green LED provides an easy way to indicate that BMC is now enabled.

ID LED

A blinking LED indicates the Chassis Identify command has been accepted.

System Status LED

There is a dual-color LED to show the system status. The BMC turns the

LED off after all event logs are cleared.

The behavior of Status LED and ID LED is listed in Table 1-2.

Table 1-4. LED Status

LED Color Status Occurrence Note

Status LED AmberBlinking See "Blinking Fault

LED Conditions" on

page14.

Off Normal status

Green Solid OnPower On (S1/S0)The power LED status is

controlled by BIOS.

Off Power Off (S4/S5)

Contents

Main Dell PowerEdge C5220 Using the Baseboard Management Controller Typographic Conventions death. ____________________ NOTE: of a computer system. Contents Page Introduction Supported Platform BMC Key Features and Functions Using the Web UI Logging in to the Web User Interface Page System Features System Information Page Server Identify Firmware Update XXX Page Front Panel User Interface Power Button LEDs Page Page System Information Page Server Health Sensor Readings Sensor Readings With Thresholds The Sensor Readings with Thresholds page shows all sensor readings and thresholds from the system. Temperature Monitoring The system supports the following temperature sensors. Current Monitoring FAN Control and Monitoring Event Log The Event Log page shows the event logs from the managed system. Configuration Page Alerts Modify Alert NOTE: Mouse Mode Network Page VLAN Settings SOL SOL Advanced Settings Page Page Users Add New User NOTE: Page Modify User PEF Modify PEF SSL Certificate .crt .pem .key Web Session Remote Control Console Redirection Page Page Page Power Control Page Page IPMI 1.5 / 2.0 Command Support List Page Page [1] Optional portion of Get System Reset Cause is not support. Page Page NOTE: