IPMI 1.5 / 2.0 Command Support List
Table 1-39. IPMI Device Global Commands
Command | NetFn | CMD | O/M | Supported |
|
|
|
|
|
Get Device ID | App | 01h | M | Yes |
Cold Reset | App | 02h | O | Yes |
Warm Reset | App | 03h | O | No |
Get Self Test Results | App | 04h | M | Yes |
Manufacture Test On | App | 05h | O | Yes |
Set ACPI Power State | App | 06h | O | Yes |
Get ACPI Power State | App | 07h | O | Yes |
Get Device GUID | App | 08h | O | Yes |
Broadcast Command: |
|
|
|
|
Broadcast ‘Get Device ID’ | App | 01h | M | No |
|
|
| ||
Table |
|
| ||
|
|
|
|
|
Command | NetFn | CMD | O/M | Supported |
|
|
|
|
|
Set BMC Global Enables | App | 2Eh | M | Yes |
Get BMC Global Enables | App | 2Fh | M | Yes |
Clear Message Buffer Flags | App | 30h | M | Yes |
Get Message Buffer Flags | App | 31h | M | Yes |
Enable Message Channel | App | 32h | O | Yes |
Receive |
|
|
|
|
Get Message | App | 33h | M | Yes |
Send Message | App | 34h | M | Yes |
Read Event Message Buffer | App | 35h | O | Yes |
Get BT Interface Capabilities | App | 36h | M | No |
Get System GUID | App | 37h | O | Yes |
52
