Manuals / Brands / Computer Equipment / Server / Dell / Computer Equipment / Server

Dell C5220 Current Monitoring, FAN Control and Monitoring

1 60

Current Monitoring

BMC supports current sensor as shown in Table1-11. The current sensor

monitoring aims to gain the SLED power consumption for power

management used.

FAN Control and Monitoring

The BMC receives all fan tachometers of the threshold base from the chassis

controller. The following is the table of the fan speed thresholds.

Table 1-11. Current Monitoring

Current Sensor Number UNCT UCT

SLED 12V 0x4E 216 252

Table 1-12. Fan Thresholds

Fan Sensor Sensor

Number

LCT LNCT

SYS FAN 1 0x68 600 rpm 720 rpm

SYS FAN 2 0x69 600 rpm 720 rpm

SYS FAN 3 0x6A 600 rpm 720 rpm

SYS FAN 4 0x6B 600 rpm 720 rpm

SYS FAN 5 0x6C 600 rpm 720 rpm

SYS FAN 6 0x6D 600 rpm 720 rpm

SYS FAN 7 0x6E 600 rpm 720 rpm

SYS FAN 8 0x6F 600 rpm 720 rpm

Contents

Main Dell PowerEdge C5220 Using the Baseboard Management Controller Typographic Conventions death. ____________________ NOTE: of a computer system. Contents Page Introduction Supported Platform BMC Key Features and Functions Using the Web UI Logging in to the Web User Interface Page System Features System Information Page Server Identify Firmware Update XXX Page Front Panel User Interface Power Button LEDs Page Page System Information Page Server Health Sensor Readings Sensor Readings With Thresholds The Sensor Readings with Thresholds page shows all sensor readings and thresholds from the system. Temperature Monitoring The system supports the following temperature sensors. Current Monitoring FAN Control and Monitoring Event Log The Event Log page shows the event logs from the managed system. Configuration Page Alerts Modify Alert NOTE: Mouse Mode Network Page VLAN Settings SOL SOL Advanced Settings Page Page Users Add New User NOTE: Page Modify User PEF Modify PEF SSL Certificate .crt .pem .key Web Session Remote Control Console Redirection Page Page Page Power Control Page Page IPMI 1.5 / 2.0 Command Support List Page Page [1] Optional portion of Get System Reset Cause is not support. Page Page NOTE: