Dell C5220 NOTE:

NOTE: Parameter 192 is used for DHCP Retry by DCS requirement.

Table 1-49. SOL Command

Command NetFn CMD O/M Supported

SOL Activating Transport 20h O No

Set SOL Configuration Parameters Transport 21h O Yes

Get SOL Configuration

Parame ters

Transport 22h O Yes

Table 1-50. PEF/PET Alerting Commands

Command NetFn CMD O/M Supported

Get PEF Capabilities S/E 10h M Yes

Arm PEF Postpone Timer S/E 11h M Yes

Set PEF Configuration

Parame ters

S/E 12h M Yes

Get PEF Configuration

Parame ters

S/E 13h M Yes

Set Last Processed Event ID S/E 14h M Yes

Get Last Processed Event ID S/E 15h M Yes

Alert Immediate S/E 16h O Yes

PET Acknowledge S/E 17h O Yes

Table 1-48. LAN Commands

Command NetFn CMD O/M Supported

Contents

Main Dell PowerEdge C5220 Using the Baseboard Management Controller Typographic Conventions death. ____________________ NOTE: of a computer system. Contents Page Introduction Supported Platform BMC Key Features and Functions Using the Web UI Logging in to the Web User Interface Page System Features System Information Page Server Identify Firmware Update XXX Page Front Panel User Interface Power Button LEDs Page Page System Information Page Server Health Sensor Readings Sensor Readings With Thresholds The Sensor Readings with Thresholds page shows all sensor readings and thresholds from the system. Temperature Monitoring The system supports the following temperature sensors. Current Monitoring FAN Control and Monitoring Event Log The Event Log page shows the event logs from the managed system. Configuration Page Alerts Modify Alert NOTE: Mouse Mode Network Page VLAN Settings SOL SOL Advanced Settings Page Page Users Add New User NOTE: Page Modify User PEF Modify PEF SSL Certificate .crt .pem .key Web Session Remote Control Console Redirection Page Page Page Power Control Page Page IPMI 1.5 / 2.0 Command Support List Page Page [1] Optional portion of Get System Reset Cause is not support. Page Page NOTE: