Dell C5220 Modify PEF

Modify PEF

Change the attributes, and click the Save button to save any changes. If you want to cancel this action, click the Cancel button to return to PEF list page.

Table 1-26. Modify PEF

Item Description

Event Filter

Action

Check/uncheck the Alert box to enable/disable alert occurs. You can select one

of power operation. If event occurs, the power action will perform.

•No Power Action

•Power Down

• Reset

•Power Cycle

Alert Policy

Num

Choose the alert policy number of the Alerts List.

Sensor Type

Select the sensor type.

Sensor Num Enter the sensor number.

Event Trigger Choose the event trigger type.

• Any: choose all trigger type events

• Select: choose a single trigger type event

Filter

Enable/Disable

Check/uncheck this box to enable/disable this filter.

Contents

Main Dell PowerEdge C5220 Using the Baseboard Management Controller Typographic Conventions death. ____________________ NOTE: of a computer system. Contents Page Introduction Supported Platform BMC Key Features and Functions Using the Web UI Logging in to the Web User Interface Page System Features System Information Page Server Identify Firmware Update XXX Page Front Panel User Interface Power Button LEDs Page Page System Information Page Server Health Sensor Readings Sensor Readings With Thresholds The Sensor Readings with Thresholds page shows all sensor readings and thresholds from the system. Temperature Monitoring The system supports the following temperature sensors. Current Monitoring FAN Control and Monitoring Event Log The Event Log page shows the event logs from the managed system. Configuration Page Alerts Modify Alert NOTE: Mouse Mode Network Page VLAN Settings SOL SOL Advanced Settings Page Page Users Add New User NOTE: Page Modify User PEF Modify PEF SSL Certificate .crt .pem .key Web Session Remote Control Console Redirection Page Page Page Power Control Page Page IPMI 1.5 / 2.0 Command Support List Page Page [1] Optional portion of Get System Reset Cause is not support. Page Page NOTE: