X ) to remove the file from your palmtop PC to the

or

Tap Cut (or press CTRL +

PC Card.

5.Open the Start menu, tap My Handheld PC, and open the PC Card folder.

6.Tap Paste in the Edit menu (or press CTRL + V ). Removing a PC Card It’s important to follow the steps below when removing a PC Card to prevent possible data loss:

1.Close all applications on your palmtop PC that have open files on the card.

2.Shut down your HP Palmtop PC.

3.Press the button to the left of the card slot to eject the card.

Formatting a New PC Card

If you insert a new, unformatted card, you will be prompted to format it. (It is not possible to reformat an already formatted card.)

USING A PC CARD MODEM

You can also use a PC Card modem in the PC Card slot. For detailed instructions on how to make a dial-up connection between your palmtop PC and a remote computer, refer to ‘Communicating Remotely’ of the Microsoft Handheld PC Companion Guide.

For a list of PC Card modems that are supported on the HP Palmtop PC, refer to the HP web site at: http://www.hp.com/handheld/index.html.

!Note

PC Card modems that draw more than 150mA on battery power are not supported. Check with your PC Card modem manufacturer on

power requirements.

It is recommended that you use an AC adapter when using PC Card modems as they drain battery power.

To avoid overheating, the palmtop PC should be placed on a hard surface when you are using a PC Card modem and AC adapter simultaneously.

Using PC Card modems when the batteries are low can cause data corruption or loss.

30-HPPalmtopPCUserGuide