3.Disconnect all external hardware devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Turn the computer upside down on a flat surface, with the upgrade bay toward you.

6.Remove the battery (see Inserting or removing the battery on page 32).

7.Remove the service door (see Removing the service door on page 34).

8.Remove the hard drive screws from the upgrade bay.

9.Loosen the upgrade bay screw (1).

10.Using a flat-bladed screwdriver, gently push the tab to release the hard drive (2).

11.Remove the hard drive from the upgrade bay (3).

38 Chapter 5 Maintenance