9. Remove the TouchPad board (1) from the top cover.
NOTE: When replacing the TouchPad board and TouchPad button board, be sure the TouchPad button actuators (2) are installed in the top cover.
Reverse this procedure to install the TouchPad board and TouchPad button board.
Bluetooth module
NOTE: The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
For use in all countries and regions except Japan and Asia Pacific countries and regions | |
|
|
For use only Japan and Asia Pacific countries and regions | |
|
|
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 39).
5. Remove the following components:
a. Hard drive (see Hard drive on page 40)
b. Optical drive (see Optical drive on page 46)
c. Keyboard (see Keyboard on page 50)
d. Switch cover (see Switch cover on page 47)
64 Chapter 4 Removal and replacement procedures