e. Speaker (see Speaker on page 53)
f. Display lid switch module (see Display lid switch module on page 54)
g. Display assembly (see Display assembly on page 55)
h. Top cover (see Top cover on page 59)
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the base enclosure.
3. Remove the Bluetooth module (3) from the base enclosure.
Reverse this procedure to install the Bluetooth module.
System board
NOTE: All system board spare part kits include replacement thermal material.
Description | Spare part number |
|
|
For use only with computer models equipped with Intel Core 2 Duo processors | |
|
|
For use only with computer models equipped with Intel Celeron M processors | |
|
|
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Component replacement procedures 65
