Power button actuator and volume button actuator
NOTE: The power button actuator and volume button actuator are included in the Hardware Kit, spare part number
Before removing the power button actuator and volume button actuator, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Remove the battery (see Battery on page 14).
6.Remove the middle frame (see Middle frame on page 15).
Remove the power button actuator and volume button actuator:
1.Turn the middle frame upside down.
2.Release the flexible tabs (1) on the ends of the power button actuator and volume button actuator from the retention clips (2) built into the middle frame.
3.Remove the power button actuator (3) and volume button actuator (4).
Reverse this procedure to install the power button actuator and volume button actuator.
Power button actuator and volume button actuator | 17 |