Perioherals

the declassification procedure, it is not supported on other vendols' disk mechanisms. Older Hewlett-Packard-builtdisk mechan- isms and products using ESDI and PC-AT interfaces also will not work.

To perform the declassification procedure, the following equipment is required: industry-standard PC running MSDOS with an Adaptec 1520,1522,1540,or 1542SCSI host bus adapter installed inside the PC; HP software utility; and HI'-manufactured SCSI disk products to be cleared or declassified.

As the disk mechanism is declassi- fied on the PC, it does not matter what type of Hewlett-Packard system is connected to the disk

Ordering information for HP Series 6000 Models 330S/D and 660SlD new disks/DATs

The following instructions are for

storage system. Product number

installing the HP 1.3-Gbyte disk

C2283A, equivalent to Option OMG

upgrade kit (P/N C2295B) or the HP

for product number C2295B, has

2-Gbyte digtal-audiotape (DAV kit

been set up for ordering with DAT

(P/N C2297A) in an HP Series 6000

mechanisms.

Model 330SlD or 660 SKI mass

 

Serial number of HP Series 6000

 

Model 330SlD or 660Sp

Upgrade product

Less than 317WXXMO(

Greater than 317WXXXXX

 

 

 

First new product

Order Option OMG

Order Option ODF or ODG

installed1

(PIN C2295Bl or PIN C2283A

with kit

Subsequent products

Order Option ODF or ODG

Order Option ODF or ODG

installed'

with kit

with kit

 

 

 

I Upgrade products referred to are the HP 1.3-Gbytedisk drive (P/N C2295BJand the HP2.0-Gbyte

DAT drive (P/N C2297AJ.

mechanism. Declasswg a disk mechanism is a time-consuming process. For example,it may take about 12 hours to declassify a 422-Mbyte disk mechanism.

For a limited time Hewlett-Packard can provide a copy of the execute- only software utility at no charge to you. Hewlett-Packard reserves the right to charge for future new software utility products or updates. Source code will not be provided. For more information, contact your HP representative.

HP 2.0-Gbyte DAT

installablein HP Series

6000 Model 330S/D and

660SlD storage systems

The HP 2.0-Gbyte digital-audio tape drive (P/N C2297A) is now back- ward compatible with HI' Series 6000 Model 330S, 330D, 660S, and 660D mass storage systems. To install these products in the com- patible products, an upgrade cable (P/N C2283A) is needed on older units. Hewlett-Packard installation is included with the kit Customer installation is not recommended.

HP DAT backup solutions

now support HP 1@lO

A-Sefies ems11

18

HP Computer Update, March 1992

Page 21
Image 21
HP 700196, 700198 HP 2.0-Gbyte DAT Installablein HP Series Model 330S/D, Serial number of HP Series, Model 330SlD or 660Sp