1Replace any cards that you removed, and then replace the add-in card bracket.

2Replace the drive cage, fan duct, and side panel (see “Closing the Computer” on page 20).

3Reconnect the power cord and all other cables.

4Reconnect the modem/phone cable.

5Turn on the computer and all peripherals.

6Run the BIOS Setup program to reset the date and time. (See “Using the BIOS Setup Program” in the User’s Guide.)

Closing the Computer

After you have finished installing memory or drives, inserting or replacing add-in cards, or changing the battery, you need to replace the drive cage, the fan duct, and the side panel.

Replacing the Drive Cage

1Holding the drive cage at a 45-degree angle, slide the two nubs (A) on the drive cage into the guides (B) on the chassis.

Note: The second nub (A) is on the other side of the drive cage (not pictured).