Remove the antenna board:
1.Unsolder the antenna cable from the system board wireless terminal (1).
2.Release the antenna cable from the routing channel (2) between the battery and the system board.
3.Detach the antenna transceiver (3) from the display panel assembly. (The antenna transceiver is attached to the display panel assembly with
4.Remove the antenna transceiver and cable. Reverse this procedure to install the antenna.
Speaker
Description | Spare part number |
|
|
Speaker Kit (includes speaker and cables) | |
|
|
Before removing the bottom speaker/vibrator module assembly, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Disconnect the battery cables from the system board (see Battery on page 15).
Speaker 17
