Remove the speaker:
1.Unsolder the speaker cables (1) from the system board terminals.
NOTE: When installing the speaker, the speaker red cable should be soldered to the system board “+” terminal, and the speaker black cable should be soldered to the
2.Release the speaker cable (2) from the retention clip built into the display panel assembly.
3.Detach the speaker (3) from the display panel assembly. (The speaker is attached to the display panel assembly with
4.Remove the speaker.
Reverse this procedure to install the speaker.
Rear-facing webcamera
Description | Spare part number |
|
|
|
|
Before removing the
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
18 | Chapter 5 Removal and replacement procedures |
