Manuals / Brands / Household Appliance / Water Pump / HP / Household Appliance / Water Pump

HP 8-UB-1 9 CERTIFICATION, 10OTHER RELEVANT DOCUMENTATION AND MANUALS, 10.1 Supplementary User Instructions, 10.2 Change notes, 10.3 Additional sources of information

1 32

Download 32 pages, 760.55 Kb

UB USER INSTRUCTIONS ENGLISH 71569247 07-04

®

9 CERTIFICATION

Certificates determined from the Contract requirements are provided with these Instructions where applicable. Examples are certificates for CE marking, ATEX marking etc. If required, copies of other certificates sent separately to the Purchaser should be obtained from the Purchaser for retention with these User Instructions.

10OTHER RELEVANT DOCUMENTATION AND MANUALS

10.1 Supplementary User Instructions

Supplementary instructions such as for a driver, instrumentation, controller, seals, sealant system etc are provided as separate documents in their original format. If further copies of these are required they should be obtained from the supplier for retention with these User Instructions.

10.2 Change notes

If any changes, agreed with Flowserve Pump Division, are made to the product after its supply, a record of the details should be maintained with these User Instructions.

10.3 Additional sources of information

Reference 1:

NPSH for Rotordynamic Pumps: a reference guide,

Europump Guide No. 1, Europump & World Pumps,

Elsevier Science, United Kingdom, 1999.

Reference 2:

Pumping Manual, 9th edition, T.C. Dickenson,

Elsevier Advanced Technology, United Kingdom, 1995.

Reference 3:

Pump Handbook, 2nd edition, Igor J. Karassik et al,

McGraw-Hill Inc., New York, 1993.

Reference 4:

ANSI/HI 1.1-1.5

Centrifugal Pumps - Nomenclature, Definitions,

Application and Operation.

Reference 5:

ANSI B31.3 - Process Piping.

Page 31 of 32

Contents

PCN=71569247 07-04(E) (supercedes 6176/6511) CONTENTS INDEX 1INTRODUCTION AND SAFETY1.1 General 1.2 CE marking and approvals 1.3 Disclaimer 1.4 Copyright 1.5 Duty conditions 1.6 Safety Gland packing must not be used when pumping hazardous liquids 1.6.4Products used in potentially explosive atmospheres 1.6.4.1 Scope of compliance 1.6.4.2 Marking II 2 GD c 135 ºC (T4) 1.6.4.3 Avoiding excessive surface temperatures 1.6.4.4Preventing the build up of explosive mixtures 1.6.4.5 Preventing sparks 1.7 Warning labels summary 1.8 Specific machine performance 1.9 Noise level 2 TRANSPORT AND STORAGE 2.1 Consignment receipt and unpacking 2.2 Handling 2.3 Lifting 2.4 Storage 3.4 Performance and operating limits 3 PUMP DESCRIPTION 3.1 Configurations 3.2 Name nomenclature 8-UB-1 4 INSTALLATION 4.1 Location 4.2 Foundation 4.3 Grouting 4.4 Initial alignment 4.5 Piping 4.5.2 Suction piping 4.5.4 Discharge piping 4.5.5 Auxiliary piping 4.5.5.1 Drains 4.5.5.2 Pumps fitted with packed gland Pumps fitted with mechanical seals 4.6 Final shaft alignment check 4.7 Electrical connections 4.8 Protection systems 5COMMISSIONING, START-UP,OPERATION AND SHUTDOWN 5.1 Pre-commissioningprocedure 5.2 Pump lubricants 5.3 Direction of rotation 5.4 Guarding 5.5 Priming and auxiliary supplies 5.6 Starting the pump 5.7 Running the pump 5.8 Stopping and shutdown 5.9Hydraulic, mechanical and electrical duty 6MAINTENANCE6.1 General 6.2 Maintenance schedule 6.2.1 Routine inspection (daily/weekly) 6.2.2 Periodic inspection (six monthly) 6.2.3 Re-lubrication Regrease Grease change 6.3 Spare parts 6.4Recommended spares and consumable items 6.5 Tools required 6.6 Fastener torques 6.7 Renewal clearances 6.8 Disassembly 6.9 Examination of parts 6.10 Assembly 6.10.4 Casing lower half 6.10.5 Casing upper half 7 FAULTS; CAUSES AND REMEDIES Page 8 PARTS LISTS AND DRAWINGS 8.1 Sectional drawings – 8-UB-1grease lubricated, gland packed 8.2 General arrangement drawing 9 CERTIFICATION 10OTHER RELEVANT DOCUMENTATION AND MANUALS 10.1 Supplementary User Instructions 10.2 Change notes 10.3 Additional sources of information USA and Canada Latin America and Caribbean Europe, Middle East and Africa Asia Pacific Flowserve Pumps Limited