HP 800, 700 manual Vertical Positioning Commands, Value, Effect, Move CAP Vertical Rows

HP PCL Commands

10.10Vertical Positioning Commands

The following commands provide cursor positioning on the vertical axis.

10.10.1Move CAP Vertical (Rows)

TABLE 33.

Move CAP Vertical (Rows) - Esc & a # R

Value

DJ600

DJ610C

DJ660C

DJ670C

DJ680C

DJ690C

DJ695C

DJ810C

DJ830C

DJ850C

DJ870C

DJ880C

DJ890C

DJ895C

DJ970C

HP2000C

EFFECT

#

n

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

Moves CAP to the same

column position on a new line

based on the active line spacing

Default

n/a

Range

-32767 to +32767 - Command is ignored for out of range values

A signed value field indicates relative movement: plus (+) or minus (-) signs move CAP down- ward and upward relative to CAP, respectively. The absence of a sign indicates absolute movement: CAP moves from the top of the logical page, an absolute distance computed by:

Distance from top of logical page = top margin + (3/4 x VMI/48.0) + (value VMI)/48.0

Except for the following, the effect of this command is limited to the logical page:

4Positive relative positioning allows movement to the next logical page.

4Negative relative positioning allows movement above the top of form, up to the limit of the logical page or the top of the physical page.

After power on or reset, CAP moves to the top of form, if not already there.

54 HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide