HP 700 Value, Effect, Font Control, Delete all fonts temp, permanent, and soft, Font ID, ified ID

HP PCL Commands

group of bytes sent by one command is called a block. A character definition consists of a first block and zero or more continuation blocks.

An unsupported or invalid character definition is ignored and discarded. An out-of-memory condition during character download deletes the entire font. Reserved fields should be set to 0.

10.12.5Font Control

TABLE 47.						Font Control - Esc * c # F
Value	DJ600	DJ610C	DJ660C	DJ670C	DJ680C	DJ690C	DJ695C	DJ810C	DJ830C	DJ850C	DJ870C	DJ880C	DJ890C	DJ895C	DJ970C	HP2000C	EFFECT
#
0	4	4	4	4	4	4	4			4							Delete all fonts (temp,
																	permanent, and soft)
1	4	4	4	4	4	4	4			4							Delete all temporary fonts
																	(temp, permanent, and soft)
2	4	4	4	4	4	4	4			4							Delete font (specified by last
																	Font ID)
3	4	4	4	4	4	4	4			4							Delete character (last Font ID
																	and Character Code)
4	4	4	4	4	4	4	4			4							Make font temporary (specified
																	by last Font ID)
5	4	4	4	4	4	4	4			4							Make font permanent (specified
																	by last Font ID)
Default	n/a
Range	0 to 5 - Command is ignored for other values, or if no font has the spec-
	ified ID

Manipulates fonts and characters designated by Font ID and Character Code.

If the primary or secondary font is deleted, a new primary or secondary font is automatically selected from the remaining fonts.

HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide 69