Hood Sensor
Description | Spare part number |
|
|
Hood sensor | |
|
|
The hood sensor is located on the top of the rear chassis panel.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).
2.Remove the computer access panel (Computer Access Panel on page 74).
3.Unplug the hood sensor cable from the connector labeled HSENSE on the system board (1).
4.Slide the hood sensor straight out of the slot in the chassis (2). Figure
To reinstall the hood sensor, reverse the removal procedure.
106 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis