Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the security screw:
1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).
2.Remove the computer access panel (Computer Access Panel on page 74).
3.Remove the front bezel (Front Bezel on page 75).
4.Remove the security screw from the inside of the front bezel. Figure
5.Replace the front bezel.
6.Install the screw through the interior of the front of the chassis into the front bezel. The screw hole is located on the left edge of the chassis next to the top hard drive bay.
Figure
76 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis