Speaker
Description | Spare part number |
|
|
Speaker | |
|
|
The speaker is attached to the front of the chassis under the rotating drive cage.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 165).
2.Remove the access panel (Access Panel on page 166).
3.Remove the front bezel (Front Bezel on page 167).
4.Rotate the drive cage to its upright position.
5.Disconnect the speaker wire from the system board labeled SPKR (1).
6.Remove the screw that secures the speaker to the chassis (2).
7.Lift the speaker from the inside of the chassis to remove it (3). Figure
To install the speaker, reverse the removal procedures.
Speaker 195