Table 2-4Computer Setup—Security (continued)

USB Security

Allows you to set Enabled/Disabled (default is Enabled) for:

 

●

Front USB Ports

 

 

◦

USB Port 1

 

 

◦

USB Port 2

 

 

◦

USB Port 3

 

 

◦

USB Port 4

 

●

Rear USB Ports

 

 

◦

USB Port 1

 

 

◦

USB Port 2

 

 

◦

USB Port 3

 

 

◦

USB Port 4

 

 

◦

USB Port 5

 

 

◦

USB Port 6

 

●

Accessory USB Ports

 

 

◦

USB Port 1

 

 

◦

USB Port 2 (some models)

 

 

◦

USB Port 3 (some models)

 

 

◦

USB Port 4 (some models)

 

 

Slot Security

Allows you to disable any PCI or PCI Express slot. Default is enabled.

 

 

Network Boot

Enables/disables the computer’s ability to boot from an operating system installed on a network

 

server. (Feature available on NIC models only; the network controller must be either a PCI

 

expansion card or embedded on the system board.) Default is enabled.

 

 

System IDs

Allows you to set:

●Asset tag (18-byte identifier), a property identification number assigned by the company to the computer.

●Ownership tag (80-byte identifier) displayed during POST.

●Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.)

●Keyboard locale setting for System ID entry.

Computer Setup (F10) Utilities 11