Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.

Description

Spare part number

 

 

DVD±RW and CD-RW SuperMulti DL Combo Drive with LightScribe

495061-001

 

 

Blu-ray Disc ROM with SuperMulti DVD±R/RW DL Drive

495062-001

 

 

DVD-ROM Drive

495060-001

 

 

Optical drive bracket

502332-001

 

 

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 44).

Remove the optical drive:

1.Position the computer with the right side toward you.

2.Remove the Phillips PM2.5×12.0 captive screw (1) that secures the optical drive to the computer.

3.Push the optical drive tab (2) to release the optical drive from the computer.

4.Remove the optical drive (3) from the computer.

5.If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you.

6.Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive.

46 Chapter 4 Removal and replacement procedures