External source mode1 | (CW time sweep only) |
Frequency range | 300 kHz to 6 GHz |
Power level | 0 to |
Spectral purity |
|
Maximum | |
spurious input |
|
Residual FM | <20 kHz |
Typical settling | 500 ms (automatic) |
time |
|
| 50 ms (manual) |
Frequency readout | 0.1% (automatic) |
accuracy |
|
Input frequency accuracy requirement2 | |
Manual | |
Accuracy | (see magnitude and phase |
| characteristics) |
Magnitude characteristics | |
Dynamic accuracy | (10 Hz IF BW) |
(300 kHz to 3GHz)
(3 to 6GHz)
Display resolution | 0.001 dB/division |
Marker resolution3 | 0.001 dB |
Trace noise |
|
(+5 dBm at
300 kHz to 3 GHz | < 0.006 dB rms |
3 GHz to 6 GHz | < 0.010 dB rms |
Reference level |
|
Range | ±500 dB |
Resolution | 0.001 dB |
Stability2 |
|
30 kHz to 3 GHz | 0.02 dB/ ˚C |
3 GHz to 6 GHz | 0.04 dB/ ˚C |
Phase characteristics | (10 Hz IF BW) |
Dynamic accuracy | |
Range | ±180˚ |
(300 kHz to 3GHz) |
|
(3 to 6GHz)
Display resolution | 0.01˚/ division |
Marker resolution3 | 0.01˚ |
Trace noise |
|
(+5 dBm at | |
300 kHz to 3 GHz | < 0.038˚ rms |
3 GHz to 6 GHz | < 0.070˚ rms |
Reference level |
|
Range | |
Resolution | 0.01˚ |
Stability |
|
30 kHz to 3 GHz | 0.05˚/ ˚C |
3 GHz to 6 GHz | 0.20˚/ ˚C |
Polar characteristics |
|
Range | 10 x |
| full scale |
Reference | ±500 units |
1.See the HP 8753ES descriptions and options for a functional description. Measurement accuracy is dependent on the stability of the input signal.
2.Typical performance.
3.Marker resolution for magnitude; phase and delay is dependent upon measured value. Resolution is limited to five digits.
11