Accessories

Calibration kits

Vector accuracy enhancement procedures require that the systematic errors of the measurement system be characterized by measuring known devices (standards) on the system over the frequency range of interest. Return loss specifications or typical values are provid- ed where available for the terminations and adapters.

HP 85031B 7-mm calibration kit

Contains precision 7-mm standards used to calibrate the HP 8753ES for measurement of devices with preci- sion 7-mm connectors.

Includes

HP part number

7 mm short/open circuit

85031-60001

7 mm 50-ohm terminations

 

(two each)

00909-60008

Specifications for terminations

RL 52 dB

DC to 5 GHz

5 to 6 GHz

RL 46 dB

HP 85032B 50-ohm type-N calibration kit

Contains precision 50-ohm type-N standards used to calibrate the HP 8753ET/ES and 50-ohm test sets for measurement of devices with 50-ohm type-N connec- tors. Precision phase-matched 7-mm to type-N adapters are included for accurate measurements of non-insertable devices. Option 001 deletes the 7-mm to type-N adapters, which are not needed with the HP 8753ET.

Includes

HP part number

N-male 50-ohm termination

00909-60009

N-female 50-ohm termination

00909-60010

N-male short circuit

85032-60008

N-female short circuit

85032-60009

N-female open circuit

85032-60012

N-male open circuit

85032-60007

7-mm to N-male adapter

 

(two each)

85054-60009

7-mm to N-female adapter

 

(two each)

85054-60001

Specifications for terminations:

DC to 3 GHz

RL 49 dB

2 to 3 GHz

RL 46 dB

3 to 6 GHz

RL 40 dB

Typical adapter characteristics:

DC to 6 GHz

RL 30 dB

HP 85033D 3.5-mm calibration kit

Contains a set of precision 3.5-mm standards to cali- brate the HP 8753ES and 50-ohm test sets for the measurement of devices with precision 3.5-mm and SMA connectors. Precision phase-matched 7-mm to 3.5-mm adapters are included for accurate measure- ments of non-insertable devices. Option 001 deletes the 7-mm to type-N adapters.

Includes

HP part number

3.5-mm-male 50-ohm termination

85033-60009

3.5-mm-female 50-ohm termination

85033-60010

3.5-mm-female short

85033-60014

3.5-mm-male short

85033-60013

3.5-mm-female open

85033-60012

3.5-mm-male open

85033-60011

7-mm to 3.5-mm female

 

adapter (two)

1250-1747

7-mm to 3.5-mm male

 

adapter (two)

1250-1746

Specifications for terminations:

RL 46 dB

DC to 1.3 GHz

1.3 to 3 GHz

RL 44 dB

3 to 6 GHz

RL 38 dB

Typical adapter characteristics:

RL 34 dB

DC to 6 GHz

HP 85036B 75-ohm type-N calibration kit

Contains a set of precision 75-ohm type-N standards to calibrate the HP 8753ES with a 75-ohm test set for measurement of devices with 75-ohm type-N connec- tors. Precision phased-matched adapters are included for accurate measurements of non-insertable devices.

Includes

HP part number

N-male 75-ohm termination

00909-60019

N-female 75-ohm termination

00909-60020

N-female 75-ohm short

85036-60011

N-male 75-ohm short

85036-60012

N-female open

85032-20001

N-male open

85032-60007

N-male to N-male 75-ohm adapter

85036-60013

N-female to N-female 75-ohm adapter

85036-60014

N-male to N-female 75-ohm adapter

85036-60015

Specifications for terminations:

RL 46 dB

DC to 2 GHz

2 to 3 GHz

RL 40 dB

24

Page 24
Image 24
HP 8753ET manual Accessories

8753ET specifications

The HP 8753ET is a sophisticated vector network analyzer designed to meet the demands of RF and microwave engineering applications. This instrument is renowned for its ability to provide high-performance measurements in a compact form factor, making it a favorite among engineers and technicians alike.

One of the main features of the HP 8753ET is its ability to perform a wide array of network analysis functions. It supports S-parameter measurements, allowing for the characterization of the linearity and performance of RF circuits. With the ability to measure reflection, transmission, and impedance characteristics, users can gain deep insights into their device under test (DUT).

An essential aspect of the HP 8753ET is its frequency range capability. It typically covers frequencies from 300 kHz to 6 GHz, which is ideal for a vast range of applications, including telecommunications, radar, and electronic warfare.

The HP 8753ET is equipped with advanced analysis features such as time-domain reflectometry (TDR) and gating capabilities. This enables engineers to identify and analyze impedance mismatches and faults over a defined time window, helping to troubleshoot and optimize RF systems effectively.

Another notable technology integrated into the HP 8753ET is its user-friendly interface that combines an easy-to-navigate display with direct access to measurement functions. This minimizes the learning curve for new users while enhancing productivity for experienced professionals.

The analyzer also supports various calibration techniques, ensuring accurate and repeatable measurements. The built-in calibration kits help improve the reliability of the results while compensating for any systematic errors associated with the test setup.

Additional characteristics of the HP 8753ET include its capability for both single-port and two-port measurements. This versatility allows users to conduct a complete array of S-parameter measurements with confidence.

Furthermore, the HP 8753ET features a storage function that allows users to save and recall measurement setups and results. This capability streamlines workflows and provides easy access to historical data for review or further analysis.

Ultimately, the HP 8753ET stands out as an essential tool for engineers in the RF and microwave domain. Its combination of high-performance measurement capabilities, an intuitive interface, and flexibility makes it a preferred choice for anyone seeking reliable and thorough network analysis in their testing and development projects.