HP Advanced Communications Controllers (ACC) manual T1/ESF performance report messages suppressed

ZCOM C I/F Library Routines

ZCONFIG (3X)

		T1/ESF PRMs transmitted as “carrier”. The
		performance report messages transmitted in T1/ESF
		mode contain an address which indicates whether
		the ACC is a “network” or “user” device. By default
		the ACC is a “user” device.
NP	1 =	T1/ESF performance report messages suppressed
	On
		This option suppresses the transmission of
		performance report messages in T1/ESF mode.
LH	1 =	Long-haul mode (Z7330B only)
	On
		Enables the receive equalization and high power
		transmit line.
CF	1 =	Reduced corner frequency (Z7330B only)
	On
		The corner frequency at which jitter
		attenuation begins, is reduced by a factor of ten by
		setting this option.
JP	1 =	JT G.706 mode (Z7330B only)
	On
		In T1/ESF mode the CRC6 is calculated	and

the remote alarm processed according to JT G.706 (Japanese variation) by setting this option.

data.setport.qlimit

New port limit (in bytes). This field is for action ZcDSC_SET_XMIT_LIMIT only.

Response Data

Chapter 4 209