HP Advanced Communications Controllers (ACC) For Z7200A, Z7340A and Z7400A ACC Interface cards

ZCOM C I/F Library Routines

ZPORT (3X)

PARAMETERS	iftno	ACC MUX interface number.
	portno	Port number in the ACC interface card:

0..For Z7200A, Z7340A and Z7400A ACC

7 interface cards

0..For the Z7300A ACC interface card

0..For the Z7350A ACC interface card

rcode	Request code:
	1	- Use configuration in interface table
	2	- Use data in cnfg
action	Configuration type:

ZCOM_ZMUXPORT_ALL	(0)	- Set all modes (all fields)
ZCOM_ZMUXPORT_CONF	(1)	- Set Configuration mode only
	(Ecode,		Mode, Parity)
ZCOM_ZMUXPORT_BAUD	(2)	- Set Baud Rate mode only (X.Clk,
		S.Clk, Baud Rate)
ZCOM_ZMUXPORT_PORT	(3)	- Set Port mode only (Pmode,
	Pmode2)
ZCOM_ZMUXPORT_BRK	(4)	- Port Break request

stat

(Return Param) Status returned from the call:

PT_OK	(0)	- No error
PT_INV_PORT	(1)	- Port number out of range
PT_BAD_PARM	(2)	- Bad parameter
PT_NOT_DSBL	(3)	- Some terminals in this port not disabled
PT_BAD_BAUD	(4)	- Bad baud rate
PT_ILL_SCLK	(5)	- Illegal clock source

278 Chapter 4