HP Advanced Communications Controllers (ACC) manual Zcomsetypenode

ZCOM C I/F Library Routines

ZEVENT_RCVR (3X)

NOTES	When an Application program issues a zread call, it can differentiate the
	type of information it is receiving by looking at the type of the message.
	ZCOM Event messages will return a message type of 5
	(ZCOM_MSTYPE_LSEM) for a local system event, and a message type of
	13 (ZCOM_MSTYPE_RSEM) for a remote system event. The difference
	between local and remote event messages is where the event was
	generated. Local event messages were generated locally and remote
	event messages were generated at a remote node. The content of the
	message will contain additional information about the event.
	The ‘C’ structure for a ZCOM Event Message is shown below:

/*--- ZCOM Event Messsage Type ---*/

typedef struct
uint8	setype;	/* Event type. */
uint8	seflag;	/* Event flags (reserved for now). */
uint16	senode;	/* Node where event was generated. */
uint32	setime;	/* Event time (Epoc time). */
union
{
struct {			/* Node Status change Event data. */
	uint16	node_num;	/* Node whose state has changed. */
	int8	nstat;	/* Node state change indicator. */
	int8	spare;	/* Reserved for future use. */
	int8	hstat[ZCOM_NHOST];		/* Link state change indicator */
	} node;
struct {			/* Dynamic Reconfiguration Event data. */
	uint32	cfg_class;		/* User supplied config class
			/*	(1-999 reserved for use by ZCOM) */
	uint32	cfg_info1;		/* User supplied class specific info. */
	} recfg;
} sedata;			/* Event class specific data. */
} zevent_type;

For the field setype there are two defined event types:

ZCOM_SETYPE_NODE	- Node Status Change Event.
ZCOM_SETYPE_RECONFIG	- Reconfiguration Complete Event.

See the ZCOM Programmer’s Reference Manual for a detailed description of the fields in this data structure.

230 Chapter 4