HP Advanced Communications Controllers (ACC) manual CARD.MMP Structure

ZCOM Tables and Data Structures

Interface Table

These fields are used internally by the ZCOM subsystem.

CARD - Interface card specific data structures (union)

This field is a union which contains two structures. These structures hold information that are specific to the type of interface card associated with this IFT entry. The structure card.mmp is used if the IFT is associated with an 8-port PCI or E1/T1 interface card. Otherwise, the card.bsp structure is used for 2/8-channel NIO and EISA interface cards.

CARD.MMP has the following fields shown in Table 3-16.

Table 3-16	CARD.MMP Structure
Field Name		Field Description	Field Type	Size
				(Bytes)
itxlstx		Express terminal list headers	struct[128]	128*40
itxlsta		High priority terminal list headers	struct[128]	128*40
itxlstb		Low priority terminal list headers	struct[128]	128*40
iplimit		Port unack TX limit (in bytes)	uns.int [128]	128*4
ipbytes		Port unack TX size (in bytes)	int [128]	128*4
ipendg_bufs		Total pending Tx size (in bufrs)	int [128]	128*4
ipstat		Port status/Subchannel status	uns.short [128]	128*2
ipcntr		Terminal count per port	uns.short [128]	128*2
iportn		Port configuration bytes	struct[4]	4*4
isubch_buf		Subchannel configuration	struct[4]	4*256
ifcmdbuf		Current backplane command buffer	uns.char [16]	16
iscratch		Scratch area for buffer alignment	uns.char [64]	64
icfg_lkupt		Card configuration parameters	struct	64

Chapter 3 85