Interface Table | HP Advanced Communications Controllers (ACC)

ZCOM Tables and Data Structures

Interface Table

This field contains the maximum number of ports supported by this specific ACC interface card.

IMAXSUBC_PORT - Maximum number of subchannels per port.

This is the maximum number of subchannels supported on each port of this ACC interface card. The minimum value of this field is 1 (e.g. 2/8-channel cards).

IMAXSUBC_CARD - Maximum number of subchannels on card.

This field contains the number of subchannels supported by this card. For a non-E1/T1 card, this value should be the same as the imaxports field.

IMAXTERMS - Maximum number of terminals allowed on card.

This field contains the maximum number of terminal ZLUs that may be configured on this card.

IFNAME - Firmware download file name

This contains the full path name of the firmware file to be downloaded into this Mux card whenever the ZCOM subsystem is started, the Mux card is reset, or is recovering from a powerfail or firmware failure. It is initialized from the information supplied in the Mux statement of the TTGEN configuration file. This field is a maximum of 256 bytes including the null terminator byte.

IFFLDT, IFFMNM - Download file link time and module name

These two fields contain the time (since Epoch) when the download firmware file is linked (by zlink program) and its module name. These are set up by zlink and stored in the download file. When ZMON loads the file to the Mux interface card, it extracts them from the file and puts them into these two fields. The MX command in zmntr displays these fields.

IFRUDT, IFRMNM, IFRREV - ROM update time, module name and revision code

The ZCOM subsystem ROM contains its module name, revision code and update time in byte locations 40~5D hex. ZMON reads these bytes from the Mux interface card when it loads the firmware file, and stores them in these fields. The MX command in zmntr displays these fields. The time is translated from the ROM ASCII time stamp and stored in Epoch format.

IFWINFO - Firmware run-time information word

Chapter 3

83

Image 83

HP Advanced Communications Controllers (ACC) manual Interface Table

Contents

ACC Programmer’s Reference Guide Page Legal Notices Page First Edition February 2004 Release Printing History Software Manuals Related Documentation Contents Zcom C I/F Library Routines Contents Contents Zcom Subsystem Introduction Zcom Software Overview Overview of Zcom Software Structure Zcom Subsystem Components Zcom Software Overview Zcom Concepts Definition and Features of ZLUs Program ZLUs Zcom Concepts User Interface References Zcom Message Handling Overview ZLU Definition Mapped ZLUs Program Message Queueing Message Queuing Physical Terminal Table Priorities Multiplexing Outbound Multiplexing Inbound Multiplexing PTZRVR=PZLU Inbound Multiplexing Terminal State Terminal State Error Handling Error Handling Chapter Zcom Tables and Data Zcom Tables and Data Structures Memory Organization Memory Organization Differences in 32-bit and 64-bit Data Structures ACC Zcom product to implement its functionality. These data Field Name Field Description Field Type Size Bytes Zcom Header StructureZcom Header Structure Hnltsl HncardHnresp Hnltql Hnhigh HndpidHndsig Hnidle Zcom Header Structure Zcom Header Structure Zcom Header Structure Zcom Header Structure Zcom Header Structure Ttgen Zcom Header Structure Qlbqnb Queue Label TableQlbgrp Qlbnam Storage Label Table Zcom Header Structure Node Entries Table Node Entries Table FLAGS.status Stats Data StructureFLAGS.event FLAGS.valid Host Link Information Structure Node Entries Table Individual ZLU Data Structure zlutype ZLU Tables Type Description ZLU Type Values ZLU Tables Field Name Field Description Size Type Bytes Logical Terminal TablesLogical Terminal Table Reserved Area Logical Terminal Table User Maintainable Area SPARE2 10 Logical Terminal Table User Maintainable Area System Status flags Logical Terminal Tables LTINST, LTBRCH, LTWORK, Ltarea Terminal logical ID LTCWCT, LTTXCT, LTRXCT, Lterct Message and error countersLogical Status Format Ltstat Physical Terminal Tables System Area Physical Terminal Tables Physical Terminal Tables User Maintainable Area Ptuser Physical Terminal Tables Physical Terminal Tables Physical Terminal Tables Terminal Status Field Ptdrst Physical Terminal Tables Physical Terminal Tables Interface Table Interface Table Imaxterms Iportn 63-32 31-2 27-18 17-1 13-12 10-6 Interface HPA Value Format Inhpa Interface Card Status Ifstat Symbol Value hex Meaning Scheduler Event Flags Ischdl Interface Table Interface Table CARD.MMP Structure CARD.BSP Structure Interface Table Tmtail Itxlstx Express Transmit List Headers Interface Table Zcomipstattxbx Port Configuration Buffer Iportn Fmode 20 4-Channel E1/T1 ACC Card Format31-30 29-26 26-22 21-20 19-16 15-11 10-0 Timeslot Array Element Structure Port Subchannel Configuration Structure INV 23 Subchannel Specification Array Element Structure31-30 29-24 23-8 Itbs Interface Table Optional E1/T1 Tunable Parameters Bquota Response Record Format Response Records Zcomrptyperemote Symbol Value MeaningResponse Type Field Zcomrptypebuffer 100 Free Queue Header Structure zfqhtype Queue Header Qfunc Queue Header Structure zqhdtypeQlimit Qfdata Chapter 103 Queue Flag Format Symbol Value Meaning Hex Chapter 105 Organization of Buffer Pool Data Buffer Pool Chapter 107 Buffer Pool Layout when first initialized Pointer to next buffer on queue Linkage to the next buffer. zbhdtype. See -30 and TableSystem flags length & status Uns.int Reserved, not used Int Flag 32 Buffer flags Bfflag Field Format Chapter 111 MRQ Message HeaderMessage Header zmhdtype MID Message ID Header zmidtype Message Type Mstype LPR Response code for message type 2 and 10 Format37 Response code for all other message types LPR XPS PGW BFR DEF ERR Message Request Header zmrqtype Request Value Description Mrqcode Terminal request codes 118 System Event Message zeventtype Structure Spare Node Status Change Event Fields ZcomsetypenodeNodenum Nstat CFGINFO1 Dynamic Reconfiguration EventCfgclass Change in Card Status Event Zcomsetypecard Chapter 123 Reserved for future use Int Zcom Kernel DataHPA Table Entries HPA value of this interface Long Chapter 125 HPA value of I/F card Hpano Chapter 127 SYS structure Zcom system global information Name Value hex State Current Zcom system statusCurrent Zcom system status Higher Order Bits Bit Name Value Meaning Hex Debug Level Field FormatDebug Level Field Values Chapter 131 132 Zcrlock Linfo Structure FieldsZcglock Zcmlock Refcount Super IFT spinlock Zcslock Data StructureLockp Zcom C I/F Library Routines 136 Initialization call Zinit Zcom library access initialization Interface configuration calls Zsend Send data buffer to ZLU ZLU information calls ZLU Definition Man Pages Fork unsafe Cancellation pointGetdevice Chapter 143 Zdevtype elements Allocated memory when it is no longer neededPointer to a data structure containing the full Device table. The device table is an array Multiprotocol ACC Utilities Reference Device file, /opt/acc/cfg/zcomdevice Zdgen1, malloc3C Opt/acc/cfg/zcomdevice.txt Ltfind Ibuf Return Param ZapLaddr Llen Chapter 149 150 Ltqdget 152 Ltqdget 154 Ltqdput 156 Ltqdput Zcom error codes and their meanings 158 MYZLU01 MakezlunameReturned Comment Name Be returned Parameter and from the same TTY, the same ZLU name will be Chapter 161 Ptfind Chapter 163 Async-signal unsafe Async-cancel unsafe Len Length in bytes of zptt buffer Pointer to a buffer into which the ZcomPhysical terminal table data will be placed Ierr != 0, then no data is moved into zptt 166 Chapter 167 Zclos Zclos Zcntl Zmoderpterrswbuf ZmodenowaitZmoderpterrs Zmodedefstatus Multi-protocol ACC Programmers’ Reference Guide Mhp Rtyp RstatReturn Param 174 Chapter 175 176 Chapter 177 Point ZcomerrorNot a cancellation File zerrmsg.msg in /opt/acc/msg ZCOMMESSAGEPATH. If not Err Error numberFound, it uses the default message file default.msg 180 Zcomlname Async-cancel safe Zcomlog3x Zcomlog 184 Zcomatsint ZcomatzerrorZcomatchar Zcomatuchar 186 Chapter 187 ACC Programmers Reference Guide under ‘ZCOM Status Message Zcomstatus Chapter 189 Zconfig Node Destination node Return Param Response data CdataRdata Chapter 193 Zcomzconfigport ZcomzconfigcntlZcomzconfigsys Zcomzconfigcard DSC Control Zcomsetypereconfig Header.tag1 Header.tag2 Any values Configuration Data header.config Data.setctl.cfgclass No specific response data or errorHeader.config Data.setsys.qlimit Data.sysret.errorHeader.tag1 Header.tag2 Data.setsys.sysname Chapter 199 Data.setcard.fname Link an interface to different hardwareHeader.tag1 Header.tag2 Any values Data.setcard.iftno Data.setcard.itype Data.cardret.iftno Data.cardret.error Data.setport.spare Data.setport.portnoData.setport.rcode Value Encoding modes Value Sync mode selectValue Operating mode Data.setport.cnfg Even parity Parity selectNo Parity Odd parity 0000 150 Value Port mode0001 300 Value Rate Fmod Frame mode parameter Value T1 Transmit Attenuation Z7330B only 15 dB 22.5 dB Value Port mode 0000 ReservedValue Other port for clock synchronization Port Frame synchronization is detected by the Falc Otherwise by default there is a delay to avoidFast link-down option Makes the line go down whenever loss of T1/E1 Reduced corner frequency Z7330B only Long-haul mode Z7330B onlyJT G.706 mode Z7330B only T1/ESF performance report messages suppressed Data.portret.status Data.portret.iftno Data.portret.portno Chapter 211 212 Data.setportsc.portno Configuration DataHeader.action Data.setportsc.iftno Receive subch number Receive fill mask Transmit subch number Transmit fill mask Set to Chapter 215 Data.setportsc.qlimit Set to ModeData.setportsc.ptcfg-ptinfo.subchb.spec Data.setportsc.len Data.portscret.status 218 Chapter 219 220 Data.setterm.portno Data.setterm.zaddrData.setterm.daddr Data.setterm.iftno Data.setterm.ptt Response Data data.termret.zaddr 224 Chapter 225 Zeventrcvr Chapter 227 228 Chapter 229 Zcomsetypenode ‘C’ structure for a Zcom Event Message is shown below Chapter 231 232 Zgetshrcvrlist Get list of current shared receivers Zgetshrcvrlist Receiver list is set to ZcMAXSHAREDRCVRS currently Type of data specified by the mode parameter. The listIs terminated by an entry with a zlu value of 0. Maximum number of receivers in each type of shared Chapter 235 Zinfo Zinfo 238 Chapter 239 Zinit Following fields Default program ZLU queue limitCalling zinit. See zrntimer3X for more information Initialization phase, before any threads are generated 242 Zltmg Error codes and their meanings Zltmx 246 Chapter 247 Zltqueue Ccccc Appln Queue Progra Returned Nmb LabelUsage Globa 250 Chapter 251 Zltstore Zltstore Extension area Logical terminal table, for the storage Chapter 255 256 Zltup 258 Chapter 259 Zluopen Unsafe Fork unsafe Async-cancelAsync-signal Unsafe 262 Chapter 263 Zmapr Zmapr Zname Zname Zcom address Chapter 269 Zopen Chapter 271 Limit PflagName 273 Zpeek Chapter 275 Zport Chapter 277 Stat For Z7200A, Z7340A and Z7400A ACC Interface cards FM1 transition = FM0 transition = Cnfg Configuration data 32 bitsEcode Sync Mode Parity Clk Baud Pmode Pmode2 = Not Used Value Parity select No Parity Odd parity Even parity Value Rate 0000 Use Baud2 1000 19,200 PmodeValue Port mode T1 ESF Chapter 283 284 Chapter 285 286 Zptup 288 Zqmve 290 Chapter 291 Zqsze Zqhdp Return param 294 Chapter 295 Zread Chapter 297 Zmhdtype in zcomsys.h for more detail Not require the returned message header. It is describedSubsection on ‘Message Header’ in the Multiprotocol ACC Programmers’ Reference Guide. See the data structure Rstat Return status No errorVe Zcom error code 300 Chapter 301 302 Chapter 303 Not a cancellation point Zrntimer Timeout processing is activated on 1-second intervals Means setting the timeout values for ALL remote nodesTtgen configuration file. If an unknown node number is Specified, it is rejected with error -6 Zenode 306 Mhp-mid.ztagw2 Zsend 308 Null may be used if the return status is not required 310 Chapter 311 Mode=0 Mode=1 Mode=2 Mode=5 Mode=8 314 Chapter 315 Zsetql Chapter 317 318 Chapter 319 320 Zsetrcvr 322 Chapter 323 Rzap Chapter 325 Ztimr Chapter 327 328