HP B- Accelerators Linux manual Rpm -Uvh iomemory-vsl-kernel-version-VSL-version.x8664.rpm

IMPORTANT: Exact package names vary, depending on the software and kernel version chosen.

3.Go to the HP website (http://www.hp.com/support), and then download all of the support rpm packages. These packages provide utilities, firmware, and other files.

For example, see the following table.

Package	What is installed
fio-util-<VSL-version	VSL utilities—Recommended
>.x86_64.rpm
fio-firmware-<firm	Firmware archive—Recommended
ware-version>.noa
rch.rpm
libvsl-<version>.x8	Libraries needed for management tools—Recommended
6_64.rpm
fio-common-<VSL-v	Files required for the init script—Recommended
ersion>.x86_64.rp
m
fio-sysvinit-<VSL-ver	Init script—Recommended
sion>.x86_64.rpm
fio-snmp-agentx-<v	Agentx SNMP subagent—Optional. For more information,
ersion>.x86_64.rp	see "Setting up SNMP for Linux (on page 27)"
m
fio-snmp-mib-<versi	SNMP MIBs—Optional. For more information, see
on>.x86_64.rpm	"Setting up SNMP for Linux (on page 27)"
libfio-dev-<version	2.x Management SDK, deprecated—Optional
>.x86_64.rpm
libfio-doc-<version	2.x Management SDK, deprecated—Optional
>.x86_64.rpm
libvsl-dev-<version	Current Management SDK—Optional
>.x86_64.rpm
libvsl-doc-<version	Current Management SDK—Optional
>.x86_64.rpm

4.Build your binary rpm from the source rpm. For more information, see "Building the IO Accelerator driver from source (on page 14)." Return to this step when the binary driver rpm is created.

5.Change to the directory where the installation packages were downloaded.

6.To install the custom-built software package, enter the following command, using the package name that you just copied or downloaded into that directory.

rpm -Uvh iomemory-vsl-<kernel-version>-<VSL-version>.x86_64.rpm

7.To install the support files, enter the following commands: rpm -Uvh lib*.rpm

rpm -Uvh fio*.rpm

The IO Accelerator and utilities are installed to the following locations.

Package type	Installation location
IO Accelerator	/lib/modules/<kernel-version>/extra/fio/iomemory-vsl.ko
Utilities	/usr/bin
Firmware	/usr/share/fio/firmware
	Software installation 13