HP B- Accelerators Linux manual Utilities

CAUTION: Output Change

Starting with version 3.0.0 and later, the standard formatting of fio-statusoutput has changed. This will affect any custom management tools that used the output of this utility.

Basic information: If no options are used, fio-statusreports the following basic information:

•Number and type of devices installed in the system

•IO Accelerator version

Adapter information:

•Adapter type

•Product number

•External power status

•PCIe power limit threshold (if available)

•Connected IO Accelerator devices Block device information:

•Attach status

•Product name

•Product number

•Serial number

•PCIe address and slot

•Firmware version

•Size of the device, out of total capacity

•Internal temperature (average and maximum, since IO Accelerator load) in degrees Centigrade

•Health status: healthy, nearing wearout, write-reduced or read-only

•Reserve capacity (percentage)

•Warning capacity threshold (percentage)

Data volume information: If the -d option is used, the following data volume information is reported in addition to the basic information:

•Physical bytes written

•Physical bytes read

All information: If the -aoption is used, all information is printed, which includes the following information in addition to basic and data volume information.

Adapter information:

•Manufacturer number

•Part number

•Date of manufacture

•Power loss protection status

•PCIe bus voltage (average, minimum, maximum)

Utilities 46