HP B321 31.5-inch manual Input mode, PC Resolution, Sdtv Resolution, Hdtv Resolution

B321/B421

6.Input mode

PC Resolution:

Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
		480	60 Hz	25.175 MHz
VGA	640	480	72 Hz	31.5 MHz	4:3	Video Graphic Array
		480	75 Hz	31.5 MHz
WVGA	720	400	70 Hz	33.75 MHz	16:9	Wide Video Graphic Array
SVGA	800	600	60 Hz	40 MHz	4:3	Super VGA
		600	75 Hz	49.5 MHz
XGA	1024	768	60 Hz	65 MHz	4:3	Extended Graphic Array
		768	75 Hz	78.75 MHz
WXGA	1280	768	60 Hz	79.5 MHz	5:3	Wide XGA
WXGA	1280	800	60 Hz	79.5 MHz	16:10	Wide XGA
SXGA	1280	1024	60 Hz	108 MHz	5:4	Super XGA
WXGA	1360	768	60 Hz	85.5 MHz	16:9	Wide XGA
UXGA	1600	1200	60 Hz	162 MHz	4:3	Ultra XGA
HD1080	1920	1080	60 Hz	148.5 MHz	16:9	HD1080

SDTV Resolution:

Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
480i	720	480	29.97 Hz	13.5 MHz	4:3	Modified NTSC Standard
480p			59.94 Hz	27 MHz
576i	720	480	25 Hz	13.5 MHz	4:3	Modified PAL Standard
576p			50 Hz	27 MHz

HDTV Resolution:

Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Stand for Mode
Resolution	H Pixels	V Lines
720p	1280	720	50 Hz	74.25 MHz	16:9	Normally DVB Mode
			60 Hz
1080i	1920	1080	25 Hz	74.25 MHz	16:9	Normally ATSC Mode
			30 Hz
1080p	1920	1080	50 Hz	148.5 MHz	16:9	Normally ATSC Mode
			60 Hz

•The PC text quality is optimum in HD 1080 mode (1920 × 1080, 60 Hz).

•Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows).

•Check your PC instruction book for information about connecting your PC to a display.

•If a vertical and horizontal frequency-select mode exists, select 60 Hz (vertical) and 31.5 KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the

[] button to enter the video mode. Also, make sure that the PC is connected.

•When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.

•This display settings table complies to the IBM/VESA standards, and based on the analog input.

•The DVI support mode is regarded as same to the PC support mode.

•The best timing for the vertical frequency to each mode is 60 Hz.

16