Selecting a Tractor mode
Note: Because this function unloads continuous forms from the currently selected tractor, tear off excess paper prior to initiating.
When the optional Tractor 2 Feeder is installed, you can press Tractor to unload the current continuous forms and switch to the continuous forms loaded in the other tractor source.
The Tractor 2 light comes on when the optional Tractor 2 Feeder is selected.
Selecting and locking a font
The printer data stream may contain control codes which select a particular font. To override the codes, you can select and lock a particular font of your choice.
1To select a font, press Font repeatedly until you see the font light on next to the selection you want.
Power | Ready | Tractor 2 | Paper |
|
|
| Out |
Start/Stop | LineFeed | FormFeed | |
Tear Off |
| Load/Unload | Tractor |
Font |
| Courier | Orator |
|
|
| |
|
| Prestige | Script |
|
| Gothic | Draft |
Lock |
| Presentor | Fast Draft |
|
|
| |
2Continue pressing Font until the Font Lock light comes on, and the font you want is selected. The font is locked until the printer is turned off.
Disabling Font Lock
1To disable Font Lock, press Font repeatedly until the Font Lock light turns off and the font you want is selected.
2If the printer is offline, press Start/Stop.
The printer is ready to print when the Ready light comes on.
Using the control panel
21
