Emulation options, Quiet | Lexmark X2500 manual

Quiet

•Enabled—The printer prints at a quieter noise level.

•Disabled—The printer prints at the normal noise level.

Note: Disabled is the factory default setting.

Note: Printing speed slows in Quiet mode.

Emulation options

Note: Enter Setup mode to configure the printer according to your needs. For more information, see “Using Setup mode” on page 48. To print a list of all default settings, press LineFeed from the Main menu.

Make Emulation option selections from IBM (the factory default setting), Epson, or OKI mode. For more information regarding data stream changes, see the Technical Reference available on the Lexmark Web site at www.lexmark.com/publications.

IBM mode

Proprinter III, available only on 2580/2581 printers, enables compatibility with the Proprinter III.

•On—The printer emulates a Proprinter III.

•Off—The printer operates with added capabilities.

AGM, available only on 2590/2591 models, lets you use the high-resolution 24-wire graphics commands. These commands are similar to those used with the Epson LQ570/LQ 1070.

•On—Graphics commands are available.

•Off—Graphics commands are not available.

Note: Off is the factory default setting.

Epson mode

•Table Select lets you select Italic Character Table or Epson Extended Graphic Character Table.

Note: Graphics is the factory default setting.

•Int'l Char Set lets you select the character set associated with the language you want to print in.

Supported international character sets for Epson mode are: USA, France, Germany, U.K., Denmark, Sweden, Italy, and Spain I.

The following character sets are also supported, but only through host commands used by Epson FX850/FX 1050: Japan, Norway, Denmark II, Korea (2580/2581 models only), Spain II, Latin America, and Legal.

Note: USA is the factory default setting.

OKI mode

OKI mode lets you select from the following functions:

•7 or 8 Bit Graphics

•Paper Out Override

•Reset Inhibit

•Print Suppress Effective

•Print DEL Code

Understanding Setup mode and menu options

55

Image 55

Lexmark X2500 manual Emulation options, Quiet

Contents

July Users GuidePage Contents Paper and specialty media guide Troubleshooting Index Safety info rma tion Part name Learn in g abou t the p r interPrinter overview Printer front view Printer back view Applying control panel overlays Printer features by model Understanding the printer features and functionsFeature/function 2580/2581 2590/2591 Feature/function All models UPC-A UPC-E Feature/function Printing a demonstration Printing from Windows or DOS Printing a network setupWindows For Lexmark Forms Printer 2580/2581 users Using IBM emulation modeFor Lexmark Forms Printer 2590/2591 users For Forms Printer 2590/2591 users Using Epson emulation modeUsing Okidata Microline emulation mode For Forms Printer 2580/2581 users Button Function Using th e control pa n elUnderstanding the control panel buttons Layer 1 control panel buttons LineFeed Layer 2 control panel buttons Layer 1 control panel lights Understanding the control panel lightsLayer 2 control panel lights Locking and unlocking the control panel Setting the printer online or offlineUsing the Load/Unload function Advancing paper Selecting and locking a font Selecting a Tractor modeDisabling Font Lock Disabling Pitch Lock Selecting and locking a pitch Load ing pa per Setting the forms thickness lever Forms thickness for 2590/2591 Forms thickness for 2580/2581 Paper paths for the pull tractor Using the Tear Off functionPaper paths Paper paths for the push tractor Loading continuous forms using the push tractor Setting the Tear Off positionLoading continuous paper Page Page Close the front cover Front loading continuous forms using the pull tractorPage Page Bottom loading continuous forms using the pull tractor Page Page Page Loading paper Loading a cut form or envelope manually Loading cut formsPage Aligning the left margin Setting Top-Of-Form for continuous forms in push mode Setting Top-of-Form Setting Top-Of-Form for a cut form or an envelope Setting Top-Of-Form for continuous forms in pull mode Setting Top-Of-Form in a macro Length Pap er and specialty me dia guidePaper types and sizes supported by the printer Width Converting the push tractor to pull tractor position Cha ngin g trac to r posi tionsPush tractor position Pull tractor position Tractor unit Converting the pull tractor to push tractor position Page Using Setup mode Understanding Setup mode and menu options Control Options Changing menu settings an examplePrinter Setup mode-Main menu To Select Press Main menu options Setup Mode Main menuMenu Language Forms Macro options Default Macro Paper Handling Options Data options Buffer Uni-Dir Printing Control options Quiet Emulation options Interface Selection Interface options Removing the ribbon cartridge Cleaning the printerMain taining the prin t er Ordering supplies Recycling Lexmark products Cleaning the outside of the printer Adm in is trativ e supp o rt Restoring the factory default settingsRestoring the US factory default settings Restoring the EU factory default settings Supporting IPSec Using 802.1x authenticationSupporting SNMPv3 Click 802.1x Authentication Running a printer test Testing the printerTroublesh oo tin g Checking an unresponsive printer Checking the printer status Using Hex Trace modePrinter status Status Action required Release LineFeed when printing starts Adjusting character bidirectional alignment Page Printer sounds like it is printing, but does not print Solving printing problemsPrinter alarm sounds Printer is noisy Printer speed slows Printer power switch is on, but the power light is offLeft margin moves to the right during printing Incorrect line length lines do not start at the left margin Paper is jammed in the printer Solving paper feed problemsPrinting continues beyond the edges of the continuous forms Selected font or pitch is not printing or is changing Paper jam in the Tractor 2 Feeder Paper is jammed in the Auto Sheet FeederPrinter does not feed paper Printer does not feed from the Auto Sheet Feeder Printer does not feed from the optional Tractor 2 FeederAuto Sheet Feeder feeds paper at an incorrect rate Auto Sheet Feeder feeds multiple sheets Paper fed from the Auto Sheet Feeder is skewed Print is too light Solving print quality problemsDots are missing or print quality is poor Graphics do not print Characters are wrong or missingForms are smudged or print is too dark Incorrect number of lines on a Incorrect line spacing or overprinting occurs Contacting Customer Support Machine type Product nameModel number United States Government Rights Meter average sound pressure, dBA Industry Canada compliance statement Mode Product power consumptionDescription Total energy usage Power SaverOff mode Limited warranty Extent of limited warranty Limited warranty service Additional rights Limitation of liability Numerics Index Converting 46 paper paths Unlocking control panel Windows printing from Index