Notebook Hardware Structure
Field Replaceable Assemblies
Torque Specification: For M2.6 screws; 5.0 +/- 1
Installing memory
(End User Replaceable)
Caution: To avoid damage from electrostatic discharge, be sure to ground yourself prior to installation or removal of memory.
The OmniBook 5000 family has two memory locations for expanding system RAM. The memory locations are under the cover on the back of the computer. Remove the cover by lifting at the finger indent.. The factory installed RAM module is located in the back pair of sockets. To add an additional 8MB, 16MB, or 32MB of RAM, use the front location. To expand beyond 40MB or 48MB of memory, you must discard the factory installed card and replace it with either a 16MB or 32MB memory module.
Figure 1 - Memory Door and Slot
25