No timer tick interrupt | The timer chip has failed. |
|
|
xxxxxh Option ROM checksum failure where xxxxxh is | The peripheral card contains a defective ROM. |
the starting address of the option ROM |
|
|
|
Shutdown failure | Either the keyboard controller is not accepting the |
| reset command or the associated reset logic has |
| failed. |
|
|
Time of day not set - run SETUP program | Clock not set. |
|
|
Timer 2 failure | The timer chip has failed. |
|
|
F2 to enter | Invalid configuration information must be changed. |
|
|
Invalid configuration information - please run SET'UP | Display adapter is configured incorrectly. Memory size |
| is incorrect. Wrong number of diskette drives. Other |
| configuration errors. |
|
|
Keyboard clock line failure | The keyboard, the keyboard cable connection, or the |
| keyboard controller is defective. |
|
|
Keyboard data line failure- | The keyboard controller firmware has failed. |
|
|
Keyboard controller failure | The keyboard controller firmware has failed. |
|
|
Keyboard stuck key failure | A key is jammed. |
|
|
Memory failure at | Circuitry associated with the memory chips has failed. |
| |
|
|
Unexpected interrupt in protected mode | Hardware interrupt or NMI occurred while in protected |
| mode. |
|
|
Real time clock failure | The RTC or battery failed. |
|
|
Message | Possible Cause |
|
|
nnnk Base Memory | The amount of base memory that tested successfully. |
|
|
nnnk Extended | The amount of extended memory that tested |
| successfully. |
|
|
Memory tests terminated by keystroke | This message indicates that a user pressed the |
| spacebar while the memory tests were nmning and |
| stopped the memory tests. |
|
|
Press the Fl key to continue | This message indicates that an error was found during |
| POST. Pressing the Fl key allows the system to |
| attempt to boot. |
|
|
Beginning memory test Press the SPACEBAR to | A user can stop the memory tests by pressing the |
terminate the memory test | spacebar. |
|
|
Press the Fl key to continue, F2 to nm the Setup utility | This message indicates that an error was found during |
| POST. Pressing the Fl key allows the system to |
| attempt to boot. Pressing F2 allows users to run the |
| |
| configuration information. |
|
|
54