HP Branch Intellectual Management System Software manual Distributed Deployment, TCP Port Usage

Distributed Deployment

The BIMS ACS modules may be installed on more than one server to meet specific performance requirements. A typical scenario is where the system has one Master server with BIMS Platform deployed and multiple Slave servers with BIMS ACS modules deployed.

To install the BIMS on a Slave Server, perform the following steps:

1.Select Start/All Programs/HP Intelligent Management Center/HP Deployment Monitoring Agent.

2.In the window displayed, select Stop IMC in the Monitor tab to stop all processes of IMC.

3.In the Deploy tab, right-click the BIMS ACS component, select Deploy the Component from the shortcut menu.

4.A dialog box appears, indicating that the component was successfully deployed. Click OK.

[ Table of Contents ]

TCP Port Usage

The BIMS Server will BIND to and use the following TCP/IP Ports.

Port

TCP 8025

TCP 9091

TCP 9044

TCP 9055

Usage

Used to receive SHUTDOWN command for the jserver process.

The JMX monitoring port used by the jserver process.

Used to receive SHUTDOWN command to the HP IMC Server service process.

Used to receive SHUTDOWN command to the Deployment Monitoring Agent process.

TCP 61616

TCP 61626

Used for communication in a Master-Slave deployment environment.

Used for communication to the HP IMC Server and Deployment Monitoring Agent.

UDP 161

UDP 162

TCP 22

TCP 20/21

Used to access network elements through SNMP.

Used to accept SNMP Traps from network elements.

SSH/SFTP port, which the configuration center uses to back up and restore the device software and configuration file through SSH/SFTP.

FTP port, which the configuration center uses to back up and restore the device software and configuration file through FTP.