[ Table of Contents ]
Upgrade Installation
This program can be upgraded from IMC BIMS 5.2 (E0401) and its patches versions, IMC BIMS 7.0 (E0101) and IMC BIMS 7.0 (E0102).
Follow these instructions to upgrade IMC:
1.Back up the IMC database on the Environment tab in the Intelligent Deployment Monitoring Agent.
2.Stop the IMC system in the Intelligent Deployment Monitoring Agent.
3.Click Install on the Monitor tab of the Intelligent Deployment Monitoring Agent.
4.Select the install/components subdirectory of the upgrade package, and click OK.
5.After the installation is complete, the Intelligent Deployment Monitoring Agent lists the components that need to be upgraded. Click OK to start upgrading the components.
6.If this is a distributed deployment, upgrade the components deployed on the slave servers separately.
7.After the update is complete, start all processes in the Intelligent Deployment Monitoring Agent window.
For more information about installation instructions, please refer to IMC Installation Guide.
[ Table of Contents ]
Un-Installation
You can remove BIMS component through the intelligent deployment monitoring agent. Perform the following steps:
1.Select Start/All Programs/HP Intelligent Management Center/HP Deployment Monitoring Agent.
2.In the window displayed, select Stop IMC in the Monitor tab to stop all processes of IMC.
3.In the Deploy tab,
4.A dialog box appears, indicating that the component was successfully removed. Click OK.
[ Table of Contents ]
