OPTIONS
SECTION 10 | OPTIONS | |
|
|
|
Section 10 - Options includes the following:
Installing/Cleaning the Telescoping I.V. Rod/O2 Holders
Installing the Solid Folding Seat
Installing the Crutch and Cane Carrier
Installing the Amputee Bracket - Super Hemi Models Only
Installing the Amputee Bracket - All Models Except Super Hemi
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attach- ing hardware is tightened securely - otherwise injury or damage may occur.
NOTE: The options in this section refer to
INSTALLING/CLEANING THE TELESCOPING I.V. ROD/ O2 HOLDERS (FIGURE 1)
INSTALLING
WARNING
The telescoping I.V. rod/O2 holder
MUST be checked weekly to ensure it is tightly secured to the wheelchair frame. If there is any looseness what- soever, tighten the attachment hardware securely BEFORE using.
TELESCOPING I.V. ROD HOLDER ONLY - Make sure the telescoping I.V. rod is tightly locked BEFORE placing I.V. medication on the rod.
The telescoping I.V. rod is designed to support I.V. medication only. DO NOT use it to support objects other than I.V. medication.
1.Slide telescoping I.V. rod/O2 holder over the step tube of the wheelchair.
NOTE: Mounting bracket of telescoping I.V. rod/ O2 holder should be positioned between the two
(2) axle mounting positions on wheelchair frame.
2.Secure telescoping I.V. rod/O2 holder to the wheelchair frame with hex screw, spacer and locknut.
Tie Wrap
Telescoping I.V.
Rod Holder
Hex Screw
Locknut
Mounting |
| Spacer | |
Bracket | Step Tube | ||
| |||
|
| ||
| Mounting |
| |
| Bracket |
| |
| Hex |
| |
| Screw |
| |
Locknut |
|
| |
Axle Mounting Positions | Spacer | ||
Step Tube of Wheelchair | |||
| |||
FIGURE 1 - INSTALLING THE TELESCOPING I.V. ROD/O2
HOLDERS
3.TELESCOPING I.V. ROD HOLDER ONLY - Secure the top of the telescoping I.V. rod holder to the wheelchair frame with a tie wrap.
9000 Series | 54 | Part No. 1056953 |
