GENERAL GUIDELINES
SECTION 1 | GENERAL GUIDELINES |
|
|
Folding "Hammock or Sling Seat" Models.
1.9000 XT RECLINERS ONLY - Detach one end of the spreader bar from the side frame. Refer to STORING/REPLACING THE SPREADER BAR in SECTION 9 of this manual.
2.Swing footrest/legrest in locked position to the front of the wheelchair.
3.Pivot footplates upward to vertical position.
4.With both hands, grasp the middle of the seat upholstery at the front and back edge and lift up.
5.Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armest towards you.
"HAMMOCK OR SLING SEAT"
MODELS
Folding Solid-Seat Models.
1.From behind the wheelchair, grasp the right hand edge of the solid seat.
2.Remove the footrests/legrests from the wheelchair.
3.Raise the seat to the hinged side.
4.With both hands, grasp the middle of the seat upholstery at the front and back edge and lift up.
5.Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armest towards you.
SOLID-SEAT MODELS
9000 Series | 20 | Part No. 1056953 |
