HP c-Class Solaris manual Fio-update-iodrive options iodriveversion.fff

CAUTION:

•During a firmware upgrade, it is critical to maintain steady power or risk failure of the IO Accelerator device. Connecting a qualified UPS is recommended prior to performing a firmware upgrade.

•It is critical to load the driver after each firmware upgrade step when scheduling sequential, multiple firmware upgrades (example: 1.2.7 to 2.1.0 to 2.3.1). If the driver is not loaded, the on-drive format will not be changed and there will be data loss.

•Data loss may occur if the IO Accelerator device firmware is downgraded. Contact HP Support (http://www.hp.com/support) for recommendations.

•The default to upgrade all IO Accelerator devices does not use the -dor -soption. The firmware is located in the <ioaccelerator_version.fff> file. Confirm that all devices need the firmware upgrade. The -p(Pretend) option, can be run to view the possible results of the update.

•Ensure that all IO Accelerator devices are detached before updating the firmware.

•Upgrade Path

There is a specific upgrade path to follow when upgrading an IO Accelerator device. Consult the Release Notes for this IO Accelerator release before upgrading any IO Accelerator devices.

IMPORTANT: If you receive an error message when updating the firmware that instructs you to update the midprom information, contact HP Customer Support (http://www.hp.com/support).

To update one or more specific devices:

If the IO Accelerator is loaded, use the -doption with the device number.

Syntax

fio-update-iodrive [options] <iodrive_version.fff>

where <iodrive_version.fff> is the path and firmware archive file provided by HP. The default path is /usr/share/fio/firmware. This parameter is required.

Options	Description
-d	Updates the specified devices (by fctx, where x is the number of the device shown in
	fio-status). If this option is not specified, all devices are updated.
	Use the -dor -soptions carefully. Updating the wrong IO Accelerator
	device could damage that device.
-f	Force upgrade (used primarily to downgrade to an earlier firmware version). If the IO
	Accelerator is not loaded, this option also requires the -soption.
	Use the -foption carefully. Updating the wrong IO Accelerator device
	could damage that device.
-l	List the firmware available in the archive.
-p	Pretend: Shows what updates would be done. However, the actual firmware is not
	modified.
-c	Clears locks placed on a device.
	Utilities 31