SNMPTraps

Enables or disables SNMP traps.

Default: disabled

Set syntax: set SNMPTraps [enableddisabled] Requires a SaveConfiguration Restart command Get syntax: get SNMPTraps

SNMPUpdates

Enables or disables the SNMP Management Information Base (MIB) database.

Default: disabled

Set syntax: set SNMPTraps [enableddisabled] Requires a SaveConfiguration Restart command Get syntax: get SNMPUpdates

TelnetPassword

Specifies password for telnet session. Only one username/password combination is available per Diamond Storage Array. RestoreConfiguration default sets the telnet username and password to the default values.Password is case insensitive, 1 to 8 characters.

Default: diamond

Set syntax: set TelnetPassword [password]

Get syntax: none

Requires a SaveConfiguration command

TelnetTimeout

Specifies the number of minutes of inactivity which will elapse before a telnet session automatically times out.Limits: 1-1440 minutes.

Default: disabled

Set syntax: set TelnetTimeout [1-1440 disabled]

Get syntax: get TelnetTimout

Requires a SaveConfiguration command

TelnetUsername

Specifies username for telnet session. Only one username/password combination is available per Diamond Storage Array. RestoreConfiguration default sets the telnet username and password to the default values.Username is case insensitive, 1 to 8 characters

Default: telnet

Set syntax: set TelnetUsername [username] Requires a SaveConfiguration Restart command

The Telnet and SNMP protocols also use CLI commands.

TelnetUsername

Specifies username for telnet session. Only one username/password combination is available per Diamond Storage Array. RestoreConfiguration default sets the telnet username and password to the default values.Username is case insensitive, 1 to 8 characters.

Default: telnet

Set syntax: set TelnetUsername [username]

Get syntax: none

Requires a SaveConfiguration command

34

Diamond Storage Array Installation and Operation Manual

Page 45
Image 45
ATTO Technology VT-Class manual SNMPTraps, SNMPUpdates, TelnetPassword, TelnetTimeout, TelnetUsername