General Use Commands | ATTO Technology VT-Class specs

6.2 General Use Commands

The following commands, listed alphabetically, describe or perform general functions.

FirmwareRestart

Causes a warm restart of the Diamond Storage Array.

Immediate: FirmwareRestart

Help

Displays a list of available commands. Type ‘help’ followed by a command name to display detailed command-specific information.

Immediate: Help [Command Name]

RestoreConfiguration

Restores configuration to either the default configuration or the configuration last saved into non-volatile memory. The saved option will undo any changes made since the last save.

Immediate: RestoreConfiguration [DefaultSaved]

SaveConfiguration

If the restart option is selected, the Diamond will cycle its power. The norestart option will save changes without restarting. Please note: certain modifications require a SaveConfiguration command and a system restart. If required, the return Ready. * will be displayed after the return for the modification. You may make several changes through commands and SaveConfiguration before implementing a restart, but once you have restarted the Diamond, all the command changes created

before the restart and saved will be implemented. Restart or no Restart parameter is optional

Immediate: SaveConfiguration <Restart NoRestart>

SystemSN

Stores the Diamond Storage Array serial number. The serial number may be 1-16 characters.

Set syntax: set SystemSN [n]

Requires a SaveConfiguration command

Get syntax: get SystemSN

VerboseMode

Specifies the detail of verbal feedback for the Command Line Interface. Disabling this option removes parameter names from ‘get’ commands and removes descriptions from ‘help’ commands.

Default: enabled (returns have parameter information)

Set syntax: set VerboseMode [enabled disabled]

Get syntax: get VerboseMode

ZoneCommit

Commits the current Planned Zone Configuration, making it the persistent, Active configuration. To complete this procedure, the ZoneState command must be entered as enabled to activate the zone before using the ZoneCommit command.

Set syntax: ZoneCommit

32

Diamond Storage Array Installation and Operation Manual

Image 43

ATTO Technology VT-Class manual General Use Commands

Contents

Diamond Storage Array VT-Class Page Page Contents ExpressNAV Pages Atto ExpressNAV Browser-based Interface Diagnostic Commands Fibre Channel Configuration CommandsSerial Port Configuration Commands Maintenance Services Commands ECC Drive Management Commands Virtual Tape Configuring the Diamond-VTDiagnostics, Upgrade and Maintenance Troubleshooting Resetting Defaults Appendix G Part numbers Xiv Appendix H Warranty Appendix D Sample Zoning Command SequencesAppendix E Specifications Xii Appendix F Product Safety Xiii Disclaimer PrefaceAtto Technology, Inc Page Diamond Storage Array-VT Product Overview Diamond-VT features Scsi model Fibre Channel model 400MB/sec Diamond-VT Technical OverviewRS-232 Ethernet ATA Interface Engine AIE The interface to each Adxt Powers ATA to New Levels Connect to Ethernet Installation InstructionsPhysical setup Set up the Ethernet connection RAID Level 10 with Hot Spare sleds Set up Virtual Tape configurationConfiguration examples Connect to Ethernet, on page 5, follow Floor model Diamond-VT Components Rack mount model Floor Model Diamond-VT Physical SetupRack Mount Physical setup Autoconfiguration Connecting a Fibre Channel ArrayManual configuration Fibre Channel connections Bits Connecting a Scsi ArrayTo connect the Scsi Diamond-VT Bus speed, MB/sec Bus width Max. bus lengths Max. device Scsi connections RS-232 port Accessing the Diamond-VTCommand Line Interface Atto ExpressNAV Snmp Details In-band CLI Over Fibre ChannelInitiator Host Diamond-VT Initiator/Host Diamond-VT Serial Port Access Serial port access To use Snmp Ethernet Access Telnet and Snmp ProtocolsTo connect to the Ethernet port To use Telnet Traps are generated for the following situations Navigating ExpressNAV Atto ExpressNAV Browser-based InterfaceBrowser compatibility Parameter name Submit button Reset button ExpressNAV Pages Partitions Tape VolumesConfiguration Logical Units SaveConfiguration command CLI Interface via ASCII-based CommandsReady Hostname Return type/mode Return format/content Command Defaults Example Summary of CLI Commands CLI index Zoneaddhost zone1 General Use Commands Ethernet Commands SNMPTraps SNMPUpdatesTelnetPassword TelnetTimeout Fibre Channel Configuration Commands FcWWName FcPortListFcPortName FcScsiBusyStatus SerialPortEcho Serial Port Configuration CommandsSerialPortBaudRate SerialPortHandshake Maintenance Services Commands Diagnostic Commands RAID5ClearDataStatus PowerAudibleAlarmSledFaultLED TapeVolumeInfo Drive Management Commands IdeWriteCache DriveWipeLUNState IdeTransferRate RAIDManualRebuild RAID5ClearDataRAIDInterleave RAIDHaltRebuild TapeWriteProtect RestoreModePagesTapeVolumeBlockSize RebuildPriority ZoneRemoveDevice ZoneClearAllZoneCreate ZoneDelete CLI configure drives Hot Spare sleds Configuring the Diamond-VTVirtual Tape Volumes RAID Level Enhancing performance Interleave Virtual Tape Optional Hot Spare Sled To set up RAID Level 10 with Hot Spare sleds Device portion defines the LUNs Planned configuration is a work-in-processZones Principles of Zoning Status and Sense Data Factors to considerType ZoneInfo To change current zones Configuring ZoningTo create a zone To remove zones Zone definition tables The Zone commands Errors Updating firmware via the RS-232 serial port Updating FirmwareUpdating firmware via the optional Ethernet card Type put ....ima Cd c\diamond\flash Ethernet Monitoring Port and CLI If the optional Diagnostics, Upgrade and MaintenancePower On Self Test Post Each time RS-232 Monitoring Port and CLI One tool to System Fault LED and Error Codes If a serious Power Supply Monitoring The Diamond-VT25C 32C 35C 40C Disk Drive Activity and Disk Fault LEDs Each Monitoring, reporting Specific situations and suggestions TroubleshootingWindows 2000 special instructions Error Messages Command Line Interface messages Type FirmwareRestart in CLI If a power supply failsIf you can’t access the Diamond-VT CLI via Ethernet If you cannot read or write to the Diamond-VT Return to Default settings Resetting DefaultsFactory Default Default Command Default Rebuilding RAID Level 5 and 10 Configurations To synchronize mirrored drives manually Hardware Maintenance Hardware maintenance Disk Drives Hot Swap Operating Instructions To replace a blower assembly Power SuppliesBlower Assemblies Scsi protocol Appendix a GlossaryFibre Channel technology SAN technology Appendix Appendix B ATA Disk Technology FeatureFibre Channel Appendix C LunInfo for a Jbod setup PartitionInfo active 59 LunInfo ZoneInfo TapeVolumeInfo Viii Symmetric Model Appendix D Sample Zoning Command SequencesFirst time configuration after download Simple configuration ZoneAddPort zone2 ZoneCreate zone3 Asymmetric ModelZoneClearAll ZoneCreate zone1 ZoneAddPort zone1 ZoneCreate zone2 Combined Symmetric/Asymmetric Model Environmental and physical Appendix E SpecificationsRack Mount Dimensions Floor Mount Dimensions Radio and television interference Appendix F Product SafetySafety compliances EMC specifications Description All models Appendix G Part numbers Manufacturer limited warranty Appendix H WarrantyContact Atto Technology, Inc