FcPortList
Lists the status of all available Fibre Channel ports.
Immediate command: FcPortList
FcPortName
Returns the Fibre Channel port name stored in NVRAM for this Fibre Channel port.
Get syntax: get FcPortName [port number]
FcScsiBusyStatus
Specifies the SCSI status value returned when the Diamond is unable to accept a SCSI command because of a temporary lack of resources.
Default: busy
Actions: set FcScsiBusyStatus [busy qfull] Requires a SaveConfiguration Restart command Get syntax: get FcScsiBusyStatus
FcWWName
Sets or view the Word Wide Name (WWPN) of the referenced Fibre Channel port. The WWPN is a unique 8- byte number that identifies the port on a Fibre Channel network. Only the three least significant bytes of the WWPN can be modified. Fabric and loop operations are unpredictable if duplicate WWNs are assigned.
Default: 20 00 0x where x is for 0 for port 0, 1 for port 1
Set syntax: set FcWWName [PortNumber [0 1] Requires a SaveConfiguration Restart command Get syntax: get FcWWName [PortNumber [0 1]
36 CLI: Fibre Channel
